View M201EW01-V2_4944020.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(c) copyright au optronics ver 0.4 1/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 document version: 0.4 date: 2005/11/11 product functional specification 20.1 inch wsxga+ color tft lcd module model name: m201ew01 v2 ( u ) preliminary specification ( ) final specification note: this specification is subject to change without notice. pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
( c ) c op y r i gh t a u o p t r on i cs v e r 0 . 4 2 / 31 2004 a ll r i gh t s r e s e r v e d. n o r e p r odu c t i on and r e d i s t r i bu t i on a ll o w e d. m 201 e w 01 v2 a u o p t r o n i c s c o r p o r a ti on p r odu ct s p ec i f i cat i on 20 .1 w i d e sx ga + c o l o r t f t - l cd m odu l e m od e l n a m e : m 201 e w 01 v . 2 a ppro v ed b y p repared b y ? dd b u mar k e t i ng di v i s i on / a u o p t ron i cs c orpora t i on c u s t o m er c he c k ed & a ppro v ed b y p d f c r ea t ed w i t h pd f f a c t o r y t r i a l v e r s i on www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 3/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 contents 1.0 handling precautions.............................................................7 2.0 general description...............................................................8 2.1 display characteristics ..............................................................................................................8 2.2 optical characteristics ...............................................................................................................9 3.0 functional block diagram....................................................13 4.0 absolute maximum ratings..................................................14 4.1 tft lcd module ......................................................................................................................14 4.2 backlight unit ............................................................................................................................14 4.3 absolute ratings of environment ............................................................................................14 5.0 electrical characteristics......................................................15 5.1 tft lcd module ......................................................................................................................15 5.1.1 power specification...............................................................................................15 5.1.2 signal electrical characteristics..............................................................................16 5.2 backlight unit ............................................................................................................................17 6.0 signal characteristic............................................................18 6.1 pixel format image ...................................................................................................................18 6.2 the input data format ...............................................................................................................19 6.3 signal description ....................................................................................................................20 6.4 timing characteristics ..............................................................................................................21 6.4.1 timing diagram....................................................................................................22 6.5 power on/off sequence .......................................................................................................23 7.0 connector & pin assignment................................................24 7.1 tft lcd module ......................................................................................................................24 7.2 backlight unit ............................................................................................................................25 7.3 signal for lamp connector .......................................................................................................25 8.0 reliability............................................................................27 9.0 environment........................................................................28 9.1 temperature and humidity .......................................................................................................28 9.1.1 operating conditions............................................................................................28 9.1.2 shipping conditions..............................................................................................28 9.2 atmospheric pressure ..............................................................................................................28 10.0 safety................................................................................29 10.1 sharp edge requirements ....................................................................................................29 10.2 materials ..................................................................................................................................29 10.2.1 toxicity.............................................................................................................29 10.2.2 flammability......................................................................................................29 pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 4/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 10.3 capacitors ...............................................................................................................................29 11.0 other requirement.............................................................30 11.1 national test lab requirement .............................................................................................30 11.2 label ........................................................................................................................................30 12.0 mechanical characteristics.................................................31 pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 5/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 record of revision version and date page old description new description remark 0.1 2004/05/13 all first edition for customer all 0.2 2005/05/11 29 11.2 label (without tuv logo) 11.2 label (with tuv logo) modified 27 10.0 reliability na removed 26 na drop test added 7 tco 03 compliance na removed 7 2.1 screen diagonal 510.54mm 2.1 screen diagonal 511.13mm modified 7 2.1 response time 20ms (typ. on/off) 2.1 response time 16ms (typ. on/off) modified 8 2.2 rising time 15ms (typ.) 2.2 rising time 11ms (typ.) modified 8 2.2 rising+falling 20ms (typ.) 2.2 rising+falling 16ms (typ.) modified 16 5.2 ircfl-ccfl operation range 6.5 (max.) 5.2 ircfl-ccfl operation range 8.0 (max.) modified 16 5.2 vicfl(0 o c)- ccfl lgnition voltage 1400(min.) 5.2 vicfl(0 o c)- ccfl lgnition voltage 1500(min.) modified 16 5.2 vicf(25 o c)- ccfl lgnition voltage 1200(min.) 5.2 vicfl(25 o c)- ccfl lgnition voltage 1150(min.) modified 16 5.2 vcfl-ccfl operation voltage 765@6.5ma(min.) 5.2 vcfl-ccfl operation voltage 740@8ma(min.) modified 16 5.2 pcfl-ccfl power consumption 15(max.) na modified 20 na 6.4 vertical section-period 1087(typ.) -blanking 37(typ.) modified 20 na 6.4 horizontal section-period 1128(typ.) -blanking 288(typ.) modified 20 6.4 clock period- min: 12; typ: na; max: na frequency-min: na ; max:85(mhz) 6.4 clock period- min: 12.3; typ: 13.6; max: 16.67 frequency-min: 60; max:81(mhz) modified 8 2.1 weight 3100 grams (max) 2.1 weight 2950 grams (typ) modified 9 2.2 viewing angle 85/85/85/85 (typ) 2.2 viewing angle 88/88/88/88 (typ) modified 9 2.2 white lux@ccfl 6.0ma 250cd/m 2 (min) 2.2 white lux@ccfl 6.0ma 240cd/m 2 (min) modified 14 4.1 lcd drive voltage +5.5v (max) 4.1 lcd drive voltage 6v (max) modified 14 4.2 ccfl current 6.5ma (max) 4.2 ccfl current 8 ma (max) modified 15 5.1.1 vdd current 1200ma (typ) 5.1.1 vdd current 1300ma (typ) modified pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 6/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 15 5.1.1 vdd power na(typ); 8(max) 5.1.1 vdd power 6.5(typ); 7(max) modified 15 5.1.1 vddns 100 (max) na removed 17 5.2 vicfl (0 o c) 1500v(min) 5.2 vicfl (0 o c) 1950v(min) modified 17 5.2 vicfl (25 o c) 1150v(min) 5.2 vicfl (25 o c) 1495v(min) modified 17 5.2 ltcfl 40,000hrs(min); 50,000hrs(typ) 5.2 ltcfl 50,000hrs(min); 60,000hrs(typ) modified 20 6.3 pin 25/26/27 (description: na) 6.3 pin 25/26/27 (description: for auo test only) modified 21 na 6.4 frame rate added 23 6.5 t1: 0ms (min); t6: 0.5ms (min) 6.5 t1: 0.5ms (min); t6: nil modified 30 11.2 label (with tuv logo) 11.2 label (without tuv logo) modified 9 2.2 response time: 12ms gtg (avg.) 2.2 response time: 8ms gtg (avg.) modified 0.3 2005/11/07 9 2.2 brightness uniformity: min:70%; typ:75% 2.2 brightness uniformity: min:75%; typ:80% modified 10 modified 0.4 2005/11/11 8 na rohs compliance added pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 7/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 1.0 handling precautions 1) since front polarizer is easily damaged, pay attention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press or pat the panel surface by fingers,hand or tooling 9) do not press the reflector sheet at the back of the module to any directions. 10) in case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the ccfl reflector edge. instead, press at the far ends of the ccfl reflector edge softly. otherwise the tft module may be damaged. 11) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 12) after installation of the tft module into an enclosure (desktop monitor bezel, for example), do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 8/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 2.0 general description this specification applies to the 20.1 inch-wide color tft-lcd module m201ew01. the display supports the wsxga+ (1680(h) x 1050(v)) screen format and 16.7m colors (rgb 8-bits data). all input signals are 2 channel lvds interface compatible. this module does not contain an inverter card for backlight. 2.1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [mm] 511.13 (20.1 wide) active area [mm] 433.44 (h) x 270.90(v) pixels h x v 1680(x3) x 1050 pixel pitch [mm] 0.258 (per one triad) x 0.258 pixel arrangement r.g.b. vertical stripe display mode normally black white luminance ( center ) [cd/m 2 ] 300 cd/m 2 @6ma (typ) contrast ratio 800 : 1 (typ) optical response time [msec] 16ms (typ, on/off) ; 8ms (average, grey to grey) color saturation 72% ntsc nominal input voltage vdd [volt] +5.0 v power consumption (vdd line + ccfl line) [watt] 30w(typ) (w/o inverter, all white pattern) weight [grams] 2950 (typ) physical size [mm] 459.4(w) x 296.4(h) x 22.8(d) (typ) electrical interface even/odd r/g/b data, 3 sync signal, clock support color 16.7m colors (rgb 8-bit data ) temperature range operating storage (shipping) [ o c] [ o c] 0 to +50 -20 to +60 surface treatment hard-coating (3h), glare treatment rohs rohs compliance pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 9/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 2.2 optical characteristics the optical characteristics are measured under stable conditions at 25 : item unit conditions min. typ. max. note [degree] [degree] horizontal (right) cr = 10 (left) 75 75 88 88 - - viewing angle [degree] [degree] vertical (up) cr = 10 (down) 75 75 88 88 - - contrast ratio normal direction 400 800 [msec] rising time - 11 25 note 1 [msec] falling time - 5 15 note 1 [msec] rising + falling - 16 40 note 1 response time [msec] grey to grey (average) - 8 - note 2 red x 0.610 0.640 0.670 red y 0.322 0.352 0.382 green x 0.258 0.288 0.318 green y 0.598 0.628 0.658 blue x 0.114 0.144 0.174 color / chromaticity coordinates (cie) blue y 0.046 0.076 0.106 white x 0.283 0.313 0.343 color coordinates (cie) white white y 0.299 0.329 0.359 white luminance at ccfl 6.0ma (central point) [cd/m 2 ] 240 300 - luminance uniformity [%] 75 80 - note 3 crosstalk (in75hz) [%] 1.5 note 4 flicker db -20 note 5 equipment: pattern generator, power supply, digital voltmeter, luminance meter (pr 880, bm-5a , bm 7 ,cs-1000, & ezcontrast* ) aperture : 1 with 100cm viewing distance (vd) or 2 with 50cm viewing distance (vd) test point: center (vesa point 9) environment: < 1 lux * ez contrast is different measurement tool with very close viewing distance. l c d m o d u l e pr-880 / bm5a / bm7 module driving equipment measuring distance /cs-1000 0 pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 10/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 note 1: definition of response time the output signals of photodetector are measured when the input signals are changed from black to white (rising time), and from white to black (falling time), respectively. the response time is interval between the 10% and 90% of amplitudes. note 2: over-drive and response time: algorithm: 16 b level - a level 3 then average tr Q 12ms & average tf Q 12ms 0% 10% 90% 100% time time o p t i c a l r e s p o n s e d r i v i n g s i g n a l a b tr tf pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 11/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 note 3: brightness uniformity of these 9 points is defined as below 9) - (1 points 9 in luminance maximum 9) - (1 points 9 in luminance minimum uniformity = x 100% note 4: crosstalk is defined as below : unit: percentage of dimension of display area l l a -l a l / l a x 100%= 1.5% max., l a and l b are brightness at location a and b l l b -l b l / l b x 100%= 1.5% max., l a and l b are brightness at location a and b 50 % 90 % 90 % 50 % 10 % 10 % 0 gray level 1/2 1/2 1/6 1/6 a b 1/2 1/2 1/6 1/6 2/3 1/3 1/3 2/3 a b 184 gray level 184 gray level pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 12/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 note5: test paterm: subchecker pattern r g b r g b r g b r g b r g b r g b method: record dbv & dc value with (westar)trd-100 level dc hz) 30 level(at ac log 20 (db) flicker = gray level = l127 gray level = l0 amplitude time dc ac pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 13/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 3.0 functional block diagram the following diagram shows the functional block of the 20.1 inches wide color tft/lcd module: jae fi-xb30sl-hf10 jst bhsr-02vs-1 mating type: mating type: jae fi-x30hl-t ( locked type ) sm02b-bhss-1-tb jae fi-x30s-h ( unlocked type ) c o n n e c t o r dc/dc converter lvds receiver timing controller gamma correction tft-lcd 1680*(3)*1050 pixels x - driver ic y - d r i v e r i c g1 g1050 d1 d5040 inverter dc power auo asic over-driver lvds + 5 v 6 ccfl i/f + x - pcb pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 14/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 4.0 absolute maximum ratings absolute maximum ratings of the module is as following: 4.1 tft lcd module item symbol min max unit conditions logic/lcd drive vin -0.3 6 [volt] note 1,2 4.2 backlight unit item symbol min max unit conditions ccfl current icfl - 8 [ma] rms note 1,2 4.3 absolute ratings of environment item symbol min max unit conditions operating humidity hop 8 95 [%rh] note storage temperature tst -20 +60 [ o c] note storage humidity hst 8 95 [%rh] note note 1: with in ta (25 ) note 2: permanent damage to the device may occur if exceed maximum values t=65 ,h=29% relative humidity % temperature - 20 0 60 50 95 5 100 0 operation range storage range storage range 8 0 60 40 20 twb=39 t=40 ,h=95% t=60 ,h=39% t=50 ,h=55% pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 15/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 5.0 electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specifications are as follows; symbol parameter min typ max units condition vdd logic/lcd drive voltage 4.5 5 5.5 [volt] 10% idd vdd current - 1300 1400 [ma] vin=5v , all white pattern, at 60hz irush lcd inrush current - - 7 [a] note pdd vdd power - 6.5 7 [watt] vin=5v , all white pattern, at 60hz vddrp allowable logic/lcd drive ripple voltage 100 [mv] p-p note: measurement conditions: +5.0v +12.0v sw vcc r1 47k r2 1k vr1 47k f1 q3 ao6402 g d 2 s d 1 d 5 d 6 c1 1uf/16v q3 ao6402 g d2 s d1 d5 d6 c3 0.01uf/25v c2 1uf/25v (high to low) control signal (lcd module input) 90% 10% vin rising time 0 v 5. 0 v 470 us pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 16/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vin is off it is recommended to refer the specifications of sn75lvds82dgg (texas instruments) in detail. each signal characteristics are as follows; symbol parameter min typ max units condition vth differential input high threshold - - +100 [mv] vicm = 1.2v note vtl differential input low threshold -100 - - [mv] vicm = 1.2v note vid input differential voltage 100 400 600 [mv] note vicm differential input common mode voltage +1.0 +1.2 +1.5 [v] vth/vtl = 100mv note note: lvds signal waveform vth vid vtl vicm vss pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 17/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 5.2 backlight unit parameter guideline for ccfl inverter symbol parameter min. typ. max. unit condition iscfl ccfl standard current 5.5 6.0 6.5 [ma] rms (ta=25 o c) note 1 ircfl ccfl operation range 3.0 6.0 8.0 [ma] rms (ta=25 o c) fcfl ccfl frequency 40 50 60 [khz] (ta=25 o c) note 2 vicfl (0 o c) ccfl ignition voltage ( end of the lamp wire connector ) 1950 - [volt] rms (ta=0 o c) note 3 vicf (25 o c) ccfl ignition voltage ( end of the lamp wire connector ) 1495 - [volt] rms (ta=25 o c) note 3 vcfl ccfl operation voltage 740 @8ma 780 @6ma 860 @3ma [volt] rms (ta=25 o c) note 4 pcfl ccfl power consumption (for reference) - 28 - [watt] (ta=25 o c) note 5 ltcfl ccfl life time 50,000 60,000 - [hour] (ta=25 o c) note 6 note 1: ccfl standard current is measured at 25 2 . note 2: ccfl frequency should be carefully determined to avoid interference between inverter and tft lcd note 3: vicfl means ignition voltage for both ends of the lamp, and ccfl inverter should be able to give out a power that has a generating capacity of over vicfl for ignition note 4: ccfl operation voltage is measured at 25 2 . note 5: the variance of ccfl power consumption is 10%. power is calculated for reference (icfl vcfl 6=pcfl). note 6: definition of life: brightness becomes 50% or less than the minimum luminance value of ccfl..the typical life time of ccfl is on the condition at 6.0 ma lamp current. pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 18/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 6.0 signal characteristic 6.1 pixel format image following figure shows the relationship of the input signals and lcd pixel format. r g b r g b r g b r g b r g b r g b r g b r g b 1 2 1 6 79 1680 1st line 1050 line pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 19/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 6.2 the input data format note 1: r/g/b data 7:msb, r/g/b data 0:lsb o = first pixel data e = second pixel data pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 20/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 6.3 signal description the module using one lvds receiver sn75lvds82(texas instruments) or compatible. lvds is a differential signal technology for lcd interface and high speed data transfer device. transmitter shall be sn75lvds83(negative edge sampling) or compatible . the first lvds port(rxoxxx) transmits odd pixels while the second lvds port(rxexxx) transmits even pixels. pin # signal name description 1 rxo0 - negative lvds differential data input (odd data) 2 rxo0+ positive lvds differential data input (odd data) 3 rxo1 - negative lvds differential data input (odd data) 4 rxo1+ positive lvds differential d ata input (odd data) 5 rxo2 - negative lvds differential data input (odd data, h - sync,v - sync,dsptmg) 6 rxo2+ positive lvds differential data input (odd data, h - sync,v - sync,dsptmg) 7 gnd power ground 8 rxoc - negative lvds differential clock input (odd cl ock) 9 rxoc+ positive lvds differential clock input (odd clock) 10 rxo3 - negative lvds differential data input (odd data) 11 rxo3+ positive lvds differential data input (odd data) 12 rxe0 - negative lvds differential data input (even clock) 13 rxe0+ po sitive lvds differential data input (even data) 14 gnd power ground 15 rxe1 - positive lvds differential data input (even data) 16 rxe1+ negative lvds differential data input (even data) 17 gnd power ground 18 rxe2 - negative lvds differential data inpu t (even data) 19 rxe2+ positive lvds differential data input (even data) 20 rxec - negative lvds differential clock input (even clock) 21 rxec+ positive lvds differential clock input (even clock) 22 rxe3 - negative lvds differential data input (even data ) 23 rxe3+ positive lvds differential data input (even data) 24 gnd power ground 25 nc no contact (for auo test only) 26 nc no contact (for auo test only) 27 nc no contact (for auo test only) 28 power power 29 power power 30 power power pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 21/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 note1: start from left side note2: input signals of odd and even clock shall be the same timing. 6.4 timing characteristics basically, interface timings described here is not actual input timing of lcd module but output timing of sn75lvds82dgg (texas instruments) or equivalent. signal item symbol min typ max unit period tv 1061 1087 1600 th active tdisp(v) 1050 1050 1050 th vertical section blanking tbp(v)+tfp(v)+pwvs 11 37 550 th period th 920 1128 1400 tclk active tdisp(h) 840 840 840 tclk horizontal section blanking tbp(h)+tfp(h)+pwhs 80 288 560 tclk period tclk 12.3 13.6 16.67 ns clock frequency freq 60 73.5 81 mhz frame rate frame rate f 60 60 75 hz connector 1 30 r x o i n 0 - v c c pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 22/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 note : de mode only 6.4.1 timing diagram h s y n c p i x e l n 1 m i n v a l i d d a t a t d i s p ( v ) 1 0 d e d e i n v a l i d d a t a r g b d a t a t h 2 r g b d a t a ( e v e n ) 3 9 m - 1 i n v a l i d d a t a 1 n h s y n c m - 2 i n v a l i d d a t a 1 1 6 5 m - 3 v s y n c i n v a l i d d a t a c l k m - 5 i n v a l i d d a t a m - 4 7 2 t b p ( h ) p i x e l p i x e l p i x e l p i x e l p i x e l r g b d a t a ( o d d ) 1 2 t b p ( v ) t c l k p i x e l p i x e l p i x e l p i x e l p i x e l p i x e l p i x e l p i x e l p i x e l p i x e l p i x e l p i x e l 8 4 3 4 t v t d i s p ( h ) l i n e l i n e l i n e l i n e l i n e l i n e t f p ( v ) t f p ( h ) p w v s p w h s pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 23/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 6.5 power on/off sequence vin power and lamp on/off sequence is as follows. interface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vin is off. 10% 90% 90% 10% t1 t2 t5 t6 t7 t3 t4 0v lamp signal vin 10% 0v 0v 10% 90% 90% 10% t1 t2 t5 t6 t7 t3 t4 0v lamp signal vin 10% 0v 0v 10% 90% 90% 10% t1 t2 t5 t6 t7 t3 t4 0v lamp signal vin 10% 0v 0v values symbol min typ max unit t1 0.5 - 10 [ms] t2 0.5 40 50 [ms] t3 200 - - [ms] t4 200 - - [ms] t5 0.5 16 50 [ms] t6 - - 10 [ms] t7 1000 - - [ms] pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 24/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 7.0 connector & pin assignment physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. 7.1 tft lcd module connector name / designation interface connector / interface card manufacturer jae or compatible type part number fi-xb30sl-hf10 mating housing part number fi-x30hl-t ( locked type ) fi-x30s-h ( unlocked type ) pin# signal name pin# signal name 1 rxo0- 2 rxo0+ 3 rxo1- 4 rxo1+ 5 rxo2- 6 rxo2+ 7 gnd 8 rxoc- 9 rxoc+ 10 rxo3- 11 rxo3+ 12 rxe0- 13 rxe0+ 14 gnd 15 rxe1- 16 rxe1+ 17 gnd 18 rxe2- 19 rxe2+ 20 rxec- 21 rxec+ 22 rxe3- 23 rxe3+ 24 gnd 25 nc 26 nc 27 nc 28 power 29 power 30 power pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 25/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 7.2 backlight unit connector name / designation lamp connector / backlight lamp manufacturer jst type part number bhsr-02vs-1 (cn3/cn4) bhr-05vs-1 (cn2/cn5) mating type part number sm02b-bhss-1-tb (2pin) sm04 (9-e2) b-bhs-1-tb (5pin) 7.3 signal for lamp connector connector no. pin no. color function 1 pink high voltage (lamp 1) 2 sky blue high voltage (lamp 2) 3 nc nc 4 black low voltage (lamp 1) cn2 5 dark blue low voltage (lamp 2) 1 white high voltage (lamp 3) upper cn3 2 white low voltage (lamp 3) 1 white high voltage (lamp 4) cn4 2 white low voltage (lamp 4) 1 pink high voltage (lamp 6) 2 sky blue high voltage (lamp 5) 3 nc nc 4 black low voltage (lamp 6) lower cn5 5 dark blue low voltage (lamp 5) pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 26/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 upper lower lamp 1 cn 2 lamp 2 lamp 3 cn 3 lamp 4 cn 4 lamp 5 cn 5 lamp 6 pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 27/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 8.0 reliability reliability test condition no test item test condition 1 temperature humidity bias (thb) 50 , 80%, 300hours 2 high temperature operation (hto) 50 , 300hours 3 low temperature operation (lto) 0 , 300hours 4 high temperature storage (hts) 60 , 300hours 5 low temperature storage (lts) -20 , 300hours 6 thermal shock test (tst) -20 /30min, 60 /30min, 100 cycles 7 on/off test on/10sec, off/10sec, 30,000 cycles 8 shock test (non-operating) 50g, 20ms, half-sine wave (+ x, + y, + z) 9 vibration test (non-operating) 1.5g(10~200hz p- p), 30 minutes each axis (x, y, z) 10 drop test package test: the drop height is 60cm. 11 esd (electrostatic discharge) contact discharge: 8kv, 150pf(330 ) 1sec, 8 points, 25 times/ point air discharge: 15kv, 150pf(330 ) 1sec, 8 points, 25 times/ point 12 altitude test operation:10,000 ft non-operation:30,000 ft pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 28/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 9.0 environment the display module will meet the provision of this specification during operating condition or after storage or shipment condition specified below. operation at 10% beyond the specified range will not cause physical damage to the unit. 9.1 temperature and humidity 9.1.1 operating conditions the display module operates error free, when operated under the following conditions; temperature 0 0 c to 50 0 c relative humidity 8% to 95% wet bulb temperature 39.0 0 c 9.1.2 shipping conditions the display module operates error free, after the following conditions; temperature -20 0 c to 60 0 c relative humidity 8% to 95% wet bulb temperature 39.0 0 c 9.2 atmospheric pressure the display assembly is capable of being operated without affecting its operations over the pressure range as following specified; pressure note maximum pressure 1040hpa 0m = sea level minimum pressure 674hpa 3048m = 10.000 feet note : non-operation attitude limit of this display module = 30,000 feet. = 9145 m. pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 29/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 10.0 safety 10.1 sharp edge requirements there will be no sharp edges or comers on the display assembly that could cause injury. 10.2 materials 10.2.1 toxicity there will be no carcinogenic materials used anywhere in the display module. if toxic materials are used, they will be reviewed and approved by the responsible adt toxicologist. 10.2.2 flammability all components including electrical components that do not meet the flammability grade ul94-v1 in the module will complete the flammability rating exception approval process. the printed circuit board will be made from material rated 94-v1 or better. the actual ul flammability rating will be printed on the printed circuit board. 10.3 capacitors if any polarized capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards. pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
(c) copyright au optronics ver 0.4 30/31 2004 all rights reserved. no reproduction and redistribution allowed. m201ew01 v2 11.0 other requirement 11.1 national test lab requirement the display module will satisfy all requirements for compliance to ul 1950, first edition u.s.a. information technology equipment csa c22.2 no.950-m89 canada, information technology equipment eec 950 international, information technology equipment en 60 950 international, information processing equipment (european norm for iec950) 11.2 label the label is on the panel as shown below: model no: m201ew01 v2 m201ew01 v2 model no: pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
ver0.4 31/32 12.0 mechanical characteristics pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
ver0.4 32/32 pdf created with pdffactory trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of M201EW01-V2

	To Download M201EW01-V2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .